is the probability of a certain level of shaking (Peak Ground Acceleration
) occurring from an earthquake in a particular area. Earthquake risk
is the probability of economic loss occurring from an earthquake in a particular area. The hazard is determined by the USGS National Seismic Hazards Mapping Program
Some extremes illustrate the differences between risk and hazard. Parts of Alaska are classified as "high hazard" but "low risk". There are major faults that generate large earthquakes with short recurrence intervals. But, there is very little population or infrastructure to suffer damage. Therefore, the relatively common high ground accelerations cause little economic loss.
By contrast, New York City is a low-to-moderate hazard but a high risk. Large earthquakes are not particularly common (low hazard). But, because building codes do not require much in the way of earthquake resistant design, and because the value of the buidling stock is very high (vulnerability), even a moderate earthquake could cause significant damage. This is exemplified by the widespread damage from the August 2011 magnitude 5.8 earthquake in Virginia, which caused $200-300 million dollars in damage.
Colorado is rated as low-to-moderate earthquake hazard by the USGS seismic hazard map
. FEMA estimates annualized earthquake losses of $5.8 million.
FEMA developed a program to estimate economic loss from natural hazards (HAZUS). The program can calculate two ways: 1) The statistical probability of loss, i.e. the average annual loss for an area (e.g. Colorado's annualized loss of $5.8 million dollars per year), or 2) a deterministic loss, i.e. what would be the total loss from an earthquake that actually occurred?
CGS has calculated the deterministic
loss from the Maximum Credible Earthquake (MCE) assigned to a number of faults around the state.